Send Inquiry

Request To Call Back

Heat Of Compression Air Dryer (HOC)

Name: Heat Of Compression Air Dryer (HOC)
Brand: ADON EQUIPMENTS PRIVATE LIMITED
Price: 1800000 INR
Availability: InStock

Price 1800000 INR/ Unit

Get a Price/Quote

MOQ : 1 Unit

Heat Of Compression Air Dryer (HOC) Specification

Temperature
Inlet Air Temp 120 - 200C (depending on compressor)

Dimension (L*W*H)
Custom, as per capacity (example: 3500 x 1600 x 2100 mm)

Pressure
7 - 40 bar(g)

Power Consumption
Low, uses heat of compression, auxiliary power for controls only

Inlet Oil Content
< 0.01 mg/m3 (with oil free compressor)

Power Input
Typically less than 1 kW (for control and valves)

Inlet Temperature
120 - 200C

Noise Level
< 70 dB(A)

Power Output
Not applicable (consumes power for control only)

Heating Power
Utilizes recovery heat from compressor, no separate heater required

Air Flow
500 - 12000 Nm3/hr (customizable)

Power Mode
Automatic/Manual

Place of Origin
India

Drive
Not applicable (static unit)

Usage
Industrial

Power Source
Electric

Lubrication Type
Oil-Free or Lubricated (compatible with compressor type)

Product Type
Heat Of Compression Air Dryer

Voltage
415 V AC (standard for industrial applications)

Color
Golden

Warranty
1 Year

Application
Compressed Air Drying in Industrial Applications

End Connections
Flanged / Screwed as per customer requirement

Pipe Material
Stainless Steel / Carbon Steel

Dew Point
Up to -40C (Atmospheric) possible

Desiccant Type
Activated Alumina / Molecular Sieve

Maintenance
Low, easy access to valves and desiccant chambers

Type
Heat of Compression (HOC) Air Dryer

Control Panel
PLC Based with user interface

Moisture Removal Efficiency
99.9%

Ambient Temperature Range
5C to 55C

Operational Mode
Fully Automatic with Manual Override

Regeneration Process
Utilizes compressor discharge heat for regeneration

Design Pressure
Up to 16 bar(g) or higher on request

Installation
Skid Mounted for easy installation

Heat Of Compression Air Dryer (HOC) Trade Information

Minimum Order Quantity
1 Unit

Payment Terms
Others

Supply Ability
10 Units Per Month

Delivery Time
10 Days

Main Domestic Market
Gujarat

About Heat Of Compression Air Dryer (HOC)

The No Purge Loss Type Air Dryer and easy to get desired dew point by removing moisture from compressed air.

Excellent in desiccant drying
Minimum Energy Loss
Very Economical
Zero purge loss
ADP (-) 40 Degree C can be easily achieved

Energy-Saving Operation

Harnessing the heat generated during air compression, this HOC air dryer eliminates the need for external heaters. This innovative approach minimizes power consumption-less than 1 kW needed-for running the control system and valves. It not only reduces energy costs but also ensures environmentally responsible operation.

Superior Moisture Removal

With a drying efficiency of 99.9%, this system ensures air at extremely low dew points, even in high-load industrial applications. The use of high-grade desiccants like activated alumina or molecular sieve guarantees long intervals between maintenance cycles and consistent performance.

Easy Installation and Maintenance

Skid-mounted and built to customer specifications, the dryer offers quick setup and integration into existing systems. The accessible design with stainless or carbon steel piping and flanged or screwed end connections simplifies routine maintenance and desiccant replacement, minimizing operational interruptions.

FAQ's of Heat Of Compression Air Dryer (HOC):

Q: How does the HOC air dryer use compressor heat for regeneration?

A: The HOC air dryer leverages the high temperature of compressor discharge (120-200C) to directly regenerate the desiccant material, utilizing this otherwise wasted heat rather than relying on electric or gas heaters, resulting in energy and cost savings.

Q: What are the main benefits of using this air dryer in industrial applications?

A: Key benefits include exceptionally low power consumption, high moisture removal efficiency (99.9%), consistent dew point as low as -40C, reliable PLC-based fully automatic operation, low maintenance requirements, compatibility with both oil-free and lubricated compressors, and customizable installation parameters.

Q: What is the typical installation process for this HOC air dryer?

A: The unit arrives skid-mounted for simple onsite installation. All connections-flanged or screwed-are tailored to user specifications, and the system integrates seamlessly with existing compressed air setups. The control panel and user interface facilitate easy commissioning and start-up.

Q: When should I perform regular maintenance on the dryer?

A: Maintenance intervals depend on air quality and usage, but the design allows for hassle-free access to valves and desiccant chambers for quick inspections and servicing. Typically, desiccant replacement or cleaning is necessary only after extended operational periods due to robust construction and quality materials.

Q: Where is this HOC air dryer manufactured and can it be exported?

A: This dryer is manufactured in India and is available for export globally. As a reputable exporter, manufacturer, and supplier, the company provides support and customization based on international standards and customer requirements.

Q: What is the power consumption of this dryer, and why is it so low?

A: The system's power requirement is typically less than 1 kW, as it only needs electricity for the PLC control panel and operating valves. No separate heating element is needed, substantially reducing operational costs.

Q: What types of compressed air systems is this dryer compatible with?

A: The HOC air dryer is compatible with both oil-free and lubricated compressors, provided inlet oil content remains below 0.01 mg/m3, making it suitable for a wide variety of industrial compressed air applications.

Tell us about your requirement